Minnesota Focus Owners Club

I have a 2004 SVT and the clutch is starting to slip so I need a new one. This is my daily and its bone stock. Any recommendations? I will be adding bolt ons with cams being the most aggressive addition, keeping it N/A.

Thanks for the input

As long as you're N/A I doubt you'll need anything more than a stock clutch.

CFM has some stuff as does CLUTCHCITYONLINE.

Stock.

get the luk clutch kit. Just put one in, works great.

Can I just go with the Luk kit without the flywheel (around $250) or do I need the new style flywheel(closer to $525 for everything)?

Thanks for the input guys

Get a new flywheel, also the luk clutch kit can be found on ebay for 400 dollars. Price is now 425

http://cgi.ebay.com/ebaymotors/LUK-02-0 ... 41512cfb05

sweet, if you find some cams for the svt under 12oo bucks let me know cus id love to do cams as whelllllll

Ask and you shall recieve.

http://focus.c-f-m.com/freeshippingcatc ... st170.aspx


Oh $12... Well........... UR FUCKED

closetfordfan wrote:Ask and you shall recieve.

http://focus.c-f-m.com/freeshippingcatc ... st170.aspx


Oh $12... Well........... UR FUCKED

looks like a lot of fing around for just moving the power band around a little. still when getting the bigger cams(the only one worth the p.i.t.a) your still looking at 12 hundred bucks.

Of which cams do you speak?

Picked up the Luk kit off ebay. 425 shipped to the house Going to install the weekend of the 14th. Any tips or tricks to dropping the tranny?

@ FORDSVTPARTS - Do you have Flywheel bolts in stock for the 6 speed? (not sure if they are different from the 5 speed) I have heard that they should be replaced when the clutch is replaced. Do you recomend this.

ThatOneBigKid wrote:Picked up the Luk kit off ebay. 425 shipped to the house Going to install the weekend of the 14th. Any tips or tricks to dropping the tranny?

@ FORDSVTPARTS - Do you have Flywheel bolts in stock for the 6 speed? (not sure if they are different from the 5 speed) I have heard that they should be replaced when the clutch is replaced. Do you recomend this.

$2.75 each and we do stock them, If you don't replace them be sure to use Loc-tite on the old bolts when you install them.

They are unique to the SVT.

ThatOneBigKid wrote:Picked up the Luk kit off ebay. 425 shipped to the house Going to install the weekend of the 14th. Any tips or tricks to dropping the tranny?

@ FORDSVTPARTS - Do you have Flywheel bolts in stock for the 6 speed? (not sure if they are different from the 5 speed) I have heard that they should be replaced when the clutch is replaced. Do you recomend this.

Rent an engine hoist to lift the trans in and out, it makes life a hell of a lot easier. You will need to rotate the trans counter clockwise to get it past the subframe (k-member). I also found this thread on focal jet to be helpful.

http://forums.focaljet.com/shift/603840 ... nters.html

So after about 20 man hours I finally got the clutch replaced and i couldn't be happier! Feels like a new car!