It's coming
-
- and so it lives.
- Posts: 1383
- Joined: Tue Aug 12, 2003 9:24 am
- Location: Mayer, MN
I saw my car today!! I have to say that I am starting to miss it a lot. I didn't think it was gonna be a big deal, but it is. For those of you who don't know my car is at New Generation Auto in Burnsville getting a custom turbo kit installed. The guys there have done a fantastic job. If you have seen my car before it will look exactly the same, there were no bumper issues with my intercooler. There is a little clearance issue with my fans and the turbo housing, but the FAL i am ordering up will take care of that. I don't have any pictures, but i have to say that the guys at New Generation are top notch and are taking their time to do the car right. They are waiting on parts right now, piping to finish off the intake side. I have asked for some special routing so that will be interesting if they can pull it off *crosses fingers*. I should have it back by Thursday of next week at the latest. Just in time for the next G2G So no excuses for not going to the next G2G!!!!!
Slower than your stock focus.
-
- and so it lives.
- Posts: 1383
- Joined: Tue Aug 12, 2003 9:24 am
- Location: Mayer, MN
This is basically what i have on there. I am also adding a FAL fan soon. 70mm ProM MAf calibrated for 42lb injectors, 42 lb fuel injectors, Ported 2000 Intake manifold, 65 mm Focus Central throttle body, crank under drive pully, 2.25" Magnaflow cat-back. Turbo info: T3 Super 60 (.60 A/R compressor and .48A/R Turbine housing) @ 10 PSI, FMIC, Hallman ES boost controller, TiAl wastegate and BOV.
The intake piping and exhaust piping (exhaust mani is by Schroed) are custom made by New Generation.
My exhaust is a bit small right now, but that is a future mod along with clutch, and Quiafe LSD. I should be able to crank up boost to 12 psi and put about 250 to the wheels. I won't do that often though.
The intake piping and exhaust piping (exhaust mani is by Schroed) are custom made by New Generation.
My exhaust is a bit small right now, but that is a future mod along with clutch, and Quiafe LSD. I should be able to crank up boost to 12 psi and put about 250 to the wheels. I won't do that often though.
Slower than your stock focus.
-
- Posts: 117
- Joined: Fri Mar 05, 2004 2:49 pm
- Location: Elk River
- Contact:
iamgod wrote: what chip you gonna run?
Good question, he's got the "M" and the "I" just not the "C".
Edit:
Look's like you'll have a very nice set up.
Last edited by Jeffescortlx on Fri May 14, 2004 12:28 pm, edited 1 time in total.
8v SPI and proud of it.
-
- and so it lives.
- Posts: 1383
- Joined: Tue Aug 12, 2003 9:24 am
- Location: Mayer, MN
SCT if i ever get the damn thing. Only been waiting a month and calling and bitching and such. I finally posted on the Modular Depot forums that i am a little pissed. Too nice if you ask me.
Slower than your stock focus.
-
- and so it lives.
- Posts: 1383
- Joined: Tue Aug 12, 2003 9:24 am
- Location: Mayer, MN
Okay my "C" is the SCT pro racer package, "Flasher" style. I have it in hand only 1 month after ordering it!! Now i have to get the s/w key damnit!
Slower than your stock focus.
-
- Cajun Mafia
- Posts: 2515
- Joined: Sun Aug 17, 2003 7:56 pm
- Car: 01 Street Wagon/02 ZTW
- Location: Minnesota River Valley
- Contact:
Sweet!!!!!!!!!!!!!!!1
-
- Cajun Mafia
- Posts: 2515
- Joined: Sun Aug 17, 2003 7:56 pm
- Car: 01 Street Wagon/02 ZTW
- Location: Minnesota River Valley
- Contact:
Sweet!!!!!!!!!!!!!!!
-
- and so it lives.
- Posts: 1383
- Joined: Tue Aug 12, 2003 9:24 am
- Location: Mayer, MN
I GOT THE S/W KEY!!!!
I wasn't expecting that for days or weeks, does anyone know if the flasher comes with the base tune you have specified?? I can't get the s/w to work says it doesn't have the car code available.
I wasn't expecting that for days or weeks, does anyone know if the flasher comes with the base tune you have specified?? I can't get the s/w to work says it doesn't have the car code available.
Slower than your stock focus.
-
- and so it lives.
- Posts: 1383
- Joined: Tue Aug 12, 2003 9:24 am
- Location: Mayer, MN
I still don't have my car, for those that were wondering. Only been since May 3rd, so i thasn't been long. If you are building a custom kit, have everything in hand before you start the install other wise you may end up waiting for parts like me. As it stands i am still waiting for turbonetics couplers and that is it, but without those i am dead in the water. I will give you the reports when i finally get it back. I miss my stereo, my handling, my power to weight ratio (more please)
Slower than your stock focus.