needing some assistance..

For your Ford Focus related discussion
Post Reply
User avatar
sc0tty8
Posts: 1816
Joined: Fri Aug 19, 2005 10:21 am
Location: Litchfield MN

Ok, since spring is coming and I got my garage rocked, I am going to try to get my hands on some parts for mock up n junk...

If anyone has some parts I could borrow or have, let me know :P

I am trying to find an old head, asseblmed w/ cams would be nice, so I can take the cam gear bolt and try to find one at fasternal with a hex head, or, if these are cheap enough new oem, I can do that... Also, want to get one with caps, so I can get my own set of bolts for the cam caps, I am not paying 50$ for a set of nuts/bolts/washers...or, 50$ for 2 arp bolts..

I'd like to get my hands on the head so I can mock up the studs into the head for the manifold I am using, and buy plenty of studs for this swap and 1 other, maybe more if there is interest.

I am also trying to find a few other parts, I will update more as I know more, but, for startes thats what I would like to get my hands on, I could pay a small amount of cash if need be.
Top
focinite
Master of Phonemic orthography
Posts: 3718
Joined: Sat Jul 02, 2005 8:32 pm
Car: black cvp vroom vroom
Location: anoka mn

i have a inter cooler from a lighting! and uper intake( im drinky) :lol: :?
Image wink wink.....bitches
Top
User avatar
sc0tty8
Posts: 1816
Joined: Fri Aug 19, 2005 10:21 am
Location: Litchfield MN

focinite wrote: i have a inter cooler from a lighting! and uper intake( im drinky) :lol: :?


Neither do me any good :cry:
Top
Louis Zerr
and so it lives.
Posts: 1383
Joined: Tue Aug 12, 2003 9:24 am
Location: Mayer, MN

I have my old head in the garage, i think all the caps are there. I will check tonight and let you know. It is a junk head since it saw major detonation and meltage in the combustion chamber, but beyond that is should work for what you described. I have some extra cam bolts too, but i do not have a set of cams due to some breakage that occurred.
Slower than your stock focus.
Top
CleanZX3
Really CleanZX4
Posts: 1211
Joined: Mon Aug 11, 2003 10:03 pm
Car: 07 ST S.A.P.

The head takes regular 8mm studs for the manifold/header. I dont know about the other stuff?
07 ST S.A.P.
Top
User avatar
sc0tty8
Posts: 1816
Joined: Fri Aug 19, 2005 10:21 am
Location: Litchfield MN

Louis Zerr wrote: I have my old head in the garage, i think all the caps are there. I will check tonight and let you know. It is a junk head since it saw major detonation and meltage in the combustion chamber, but beyond that is should work for what you described. I have some extra cam bolts too, but i do not have a set of cams due to some breakage that occurred.


Yeah thats fine of you don't have the cams, but if you got the bolts that go into the gears and then into the cam buckets, then I should be able to just go to fasternal and see if its what everyone says that place it.
Top
User avatar
sc0tty8
Posts: 1816
Joined: Fri Aug 19, 2005 10:21 am
Location: Litchfield MN

Got the head :)
Top
focinite
Master of Phonemic orthography
Posts: 3718
Joined: Sat Jul 02, 2005 8:32 pm
Car: black cvp vroom vroom
Location: anoka mn

that reminds me of a joke...... you know how to tell if you got a good friend?
if he gose out and getts two blow jobs and comes back and gives you one!!!! :o :o :lol: :lol:
Image wink wink.....bitches
Top
User avatar
sc0tty8
Posts: 1816
Joined: Fri Aug 19, 2005 10:21 am
Location: Litchfield MN

focinite wrote: that reminds me of a joke...... you know how to tell if you got a good friend?
if he gose out and getts two blow jobs and comes back and gives you one!!!! :o :o :lol: :lol:


:roll: :lol: :P
Top
Post Reply

Return to “Focus Tuning & Performance”