Page 3 of 3

Re: SVT clutch

Posted: Fri Jun 25, 2010 6:41 pm
by Patalrob
Miller wrote:Mankato ford wanted 750.
:shock: This is why Steve is the Man!!

Re: SVT clutch

Posted: Mon Aug 02, 2010 9:03 am
by ThatOneBigKid
Just picked up the Luk kit for my SVT. Gonna be tearing into it next weekend. @Miller - What was the reason you needed new half shaft? Just dont want to run into the same problem.

Re: SVT clutch

Posted: Mon Aug 02, 2010 11:22 am
by Steve@Tasca
ThatOneBigKid wrote:Just picked up the Luk kit for my SVT. Gonna be tearing into it next weekend. @Miller - What was the reason you needed new half shaft? Just dont want to run into the same problem.
If you're pulling the shafts just make sure you don't try yanking it out of the transmission or you can pull the inner joint apart and tear the boot.

You'll need a big slide hammer with a fork attachment to get the drivers side out easily.

Re: SVT clutch

Posted: Mon Aug 02, 2010 11:33 am
by Miller
I ruined mine when reinstalling them. grease those groves first. Stripped out the end of them by trying to pull them back into place with an impact.