Minnesota Focus Owners Club

f-it!!!!! runn em out da hood derby car style!!!!!!!!!!!!!!! yeeeeeeeeeeeeeeHAaaaaaaaaaaaa!!!!!

IMINHELL wrote: Just looked at their site, http://www.trubendz.com/home.asp?produc ... ype=detail
$140 for tubing don't sound too bad to me. Add another $70 for my muffler and I am set.

Eh that kinda looks like a hassle, you'd have to weld on all the hangers, the flanges, ect.. check out the MBRP if your looking for a cheap exaust.

- Josh

umdivx wrote: Eh that kinda looks like a hassle, you'd have to weld on all the hangers, the flanges, ect.. check out the MBRP if your looking for a cheap exaust.

- Josh

But if I get the MBRP then I'd have to cut the muffler off and measure/cut the end off to fit my can on there, so in essence I'd be throwing away the most expensive parts of their exhaust. Welding is not a problem, I just cannot bend pipe at my home. And I want to try an AeroChamber on a Focus (it sounds sooo nice on my Conquest). It would cost me around $100 to have the pipe bent locally, about.

John