dumb question...
-
- Posts: 80
- Joined: Thu Jul 28, 2005 10:43 pm
- Location: Newport, MN
does anyone know off the top of their heads how to change the dang rear blinker buld on the stock tails? i dont have the manual and ive taken apart the panels too many times and it sucks so if that could be avoided i was just wondering? any help would be much appreciated.
-
- have you seen my boxers?
- Posts: 4072
- Joined: Tue Jun 21, 2005 12:11 pm
- Car: 09 Mustang GT, 14 Focus
- Location: WI
You don't need to change the bulb. You need to top off your blinker fluid
. Not sure though, haven't had to before. Also what are you doing mon. (tommorow) night?

Prestige WorldWide The First Word In Entertainment
______________Boats and Ho's!_____________
______________Boats and Ho's!_____________
-
- Master of Phonemic orthography
- Posts: 3718
- Joined: Sat Jul 02, 2005 8:32 pm
- Car: black cvp vroom vroom
- Location: anoka mn
for the 3door , there are some wing nuts in the hatch area and two phillips screws on th inner seal of the hatch opening. the sedan, open the trunk its ether 3 10 mm nuts or two wing nuts, acssesed behind the carpet.

-
- Posts: 80
- Joined: Thu Jul 28, 2005 10:43 pm
- Location: Newport, MN
Thanks focinite, I will check that out tomorrow and see if I can't break something in my car, and Nils you idiot the first thing I did was top off the blinker fluid but that didn't help. As for tomorrow, I work from 3-8, after that im free so feel free to call me up.
-
- have you seen my boxers?
- Posts: 4072
- Joined: Tue Jun 21, 2005 12:11 pm
- Car: 09 Mustang GT, 14 Focus
- Location: WI
portfocus33 wrote: Thanks focinite, I will check that out tomorrow and see if I can't break something in my car, and Nils you idiot the first thing I did was top off the blinker fluid but that didn't help. As for tomorrow, I work from 3-8, after that im free so feel free to call me up.
I'll call you. But come over to BWW is oakdale (right off radio) when you get done with work. A bunch of us will be there street rac3ring!111 hahaha.
Prestige WorldWide The First Word In Entertainment
______________Boats and Ho's!_____________
______________Boats and Ho's!_____________
- Steve@Tasca
- Midget
- Posts: 8928
- Joined: Fri Jan 21, 2005 1:26 pm
portfocus33 wrote: Thanks focinite, I will check that out tomorrow and see if I can't break something in my car, and Nils you idiot the first thing I did was top off the blinker fluid but that didn't help. As for tomorrow, I work from 3-8, after that im free so feel free to call me up.
Yeah, but did you use the proper "Winter" viscosity blinker fluid? It is specially made for our harsh Northern climate.
While you're doing maintenance you should probably check the muffler bearings and have the Fluffner valve cleaned.
Tasca Auto Group- Employee pricing on all parts.

http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com

http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
-
- Master of Phonemic orthography
- Posts: 3718
- Joined: Sat Jul 02, 2005 8:32 pm
- Car: black cvp vroom vroom
- Location: anoka mn
dont forget the fux capacitor, hook up you turbulomitor it should read about 400 jigga watss, if not your srcewed and the oftenhimmer will need to be reflabeergasted! 

