New here, from MI but have friends in MN...

Non Focus discussion. Pretty much other cars and off topic stuff.
Post Reply
User avatar
Spork Sports
Posts: 7
Joined: Mon Feb 20, 2006 12:06 am
Location: Macomb, MI

Just wanted to say hello to everyone in MN, I plan on visiting Rochester, MN sometime this Spring/Summer. I thought it would be a good idea to come over here and make some friends for when I am in town. I am sure you guys wouldn't mind a powerworks equipped ZX3 coming to town! :wink:

I own a performance shop here in MI, and I also supply alot of the car clubs with embroidered apparel here in MI. I have also done hoodies for [FJ] and tfc, and am currently looking to expand a product line for both. If anybody is interested in taking a look at what we do, links to our MySpace sites are in my siggy. Feel free to add us if you have MySpace as well!

I currently have a 2001 ZX3 equipped with a powerworks sc, and I just picked up a 2000 ZX3 and looking to put a powerworks sc on it as well. I will be posting the progress on that car as it has 105k, and is bone stock.

Hope to meet some people this summer!

Gerald
SEIFERT TECHNIK / SPEED NEEDLE EMBROIDERY

2001 Ford Focus ZX3 powerworks
Top
spots25
Posts: 761
Joined: Tue Aug 09, 2005 12:24 pm
Contact:
Contact spots25

sweet! me an 02designs are both in Rochester, and I would definately be up for a little mini-meet sometime. I was fortunate enough to drive a Powerworks car down at jetfest, so I know how much ass you car kicks. 8)
00' Kona
Top
User avatar
Spork Sports
Posts: 7
Joined: Mon Feb 20, 2006 12:06 am
Location: Macomb, MI

spots25 wrote: sweet! me an 02designs are both in Rochester, and I would definately be up for a little mini-meet sometime. I was fortunate enough to drive a Powerworks car down at jetfest, so I know how much ass you car kicks. 8)


I was just about ready to buy a Vortech SC when I test drove the Powerworks cars at JetFest, man was I sold! I knew I wanted to became a dealer for them ASAP, and so I did.

Good to know there are some people in Rochester, I look forward to visiting for a week.
SEIFERT TECHNIK / SPEED NEEDLE EMBROIDERY

2001 Ford Focus ZX3 powerworks
Top
spots25
Posts: 761
Joined: Tue Aug 09, 2005 12:24 pm
Contact:
Contact spots25

Spork Sports wrote:
spots25 wrote:sweet! me an 02designs are both in Rochester, and I would definately be up for a little mini-meet sometime. I was fortunate enough to drive a Powerworks car down at jetfest, so I know how much ass you car kicks. 8)


I was just about ready to buy a Vortech SC when I test drove the Powerworks cars at JetFest, man was I sold! I knew I wanted to became a dealer for them ASAP, and so I did.

Good to know there are some people in Rochester, I look forward to visiting for a week.


oh yeah, and 02's car will be vortech'd by that time, so you guys can race :lol:
00' Kona
Top
o2designs
Making skinny jeans look baggy since 2009
Posts: 8253
Joined: Sun Feb 13, 2005 3:27 pm
Car: Bone Stock Focuseses
Location: Rochester

spots25 wrote:
Spork Sports wrote:
spots25 wrote:sweet! me an 02designs are both in Rochester, and I would definately be up for a little mini-meet sometime. I was fortunate enough to drive a Powerworks car down at jetfest, so I know how much ass you car kicks. 8)


I was just about ready to buy a Vortech SC when I test drove the Powerworks cars at JetFest, man was I sold! I knew I wanted to became a dealer for them ASAP, and so I did.

Good to know there are some people in Rochester, I look forward to visiting for a week.


oh yeah, and 02's car will be vortech'd by that time, so you guys can race :lol:


/\/\correction::FocusSport'd...LOL
Pants too tight, wheels so bright!
Top
User avatar
Spork Sports
Posts: 7
Joined: Mon Feb 20, 2006 12:06 am
Location: Macomb, MI

Oh man, I am already being set-up and I am not even there yet! LOL! What made you go the FocusSport route? I've got the PW's Zetec kits for $3750 shipped, IMO thats a steal. My car is disassembled at the moment, sadly I do not think I will make it to the challenge because of my pre-tax return budget. I would do anything to make it down there and compete against those high budget shops.
SEIFERT TECHNIK / SPEED NEEDLE EMBROIDERY

2001 Ford Focus ZX3 powerworks
Top
o2designs
Making skinny jeans look baggy since 2009
Posts: 8253
Joined: Sun Feb 13, 2005 3:27 pm
Car: Bone Stock Focuseses
Location: Rochester

What high budget shops? So far, all my mods have been done in my driveway. Thats the same place I plan on installing the SC aswell.
I don't even have my car in my possesion right now anyway. Its still in storage untill the end of March.
Unless its on a track, I'm not racing anyway...
Pants too tight, wheels so bright!
Top
User avatar
Spork Sports
Posts: 7
Joined: Mon Feb 20, 2006 12:06 am
Location: Macomb, MI

I am refering to shops like F2 and CFM, etc... Those guys have purpose built cars, where mine is my daily driver. Thats what I mean by high budget shops. I consider myself a low budget shop, and would love to compete against them, thats all. I have done all of my mods myself also, its the only way to go.
SEIFERT TECHNIK / SPEED NEEDLE EMBROIDERY

2001 Ford Focus ZX3 powerworks
Top
spots25
Posts: 761
Joined: Tue Aug 09, 2005 12:24 pm
Contact:
Contact spots25

o2designs wrote: /\/\correction::FocusSport'd...LOL


oops... well its a centrifugal blower either way :lol:

at any rate, I was kinda kidding about the race anyways, because street racing is bad mmmmkay?
00' Kona
Top
User avatar
sc0tty8
Posts: 1816
Joined: Fri Aug 19, 2005 10:21 am
Location: Litchfield MN

o2designs wrote: /\/\correction::FocusSport'd...LOL


It uses a vortech head, so, he is partially right 8)
Top
o2designs
Making skinny jeans look baggy since 2009
Posts: 8253
Joined: Sun Feb 13, 2005 3:27 pm
Car: Bone Stock Focuseses
Location: Rochester

sc0tty8 wrote:
o2designs wrote: /\/\correction::FocusSport'd...LOL


It uses a vortech head, so, he is partially right 8)


True dat...
Pants too tight, wheels so bright!
Top
trahma
has a blownup bomb
Posts: 1247
Joined: Sun Aug 10, 2003 3:47 pm
Car: 2002 Malibu Blue ZX3
Location: Minneapolis
Contact:
Contact trahma

sc0tty8 wrote: It uses a vortech head, so, he is partially right 8)


vortech doesn't make heads... n00b. 8)
reconstruction.
Top
Sucka612
VeeDub in Da House
Posts: 2065
Joined: Wed Jun 22, 2005 4:02 pm
Location: Minneapolis, MN

That's a really nice ZX3. Finally, a yellow Focus.
Image
Top
User avatar
sc0tty8
Posts: 1816
Joined: Fri Aug 19, 2005 10:21 am
Location: Litchfield MN

trahma wrote:
sc0tty8 wrote:It uses a vortech head, so, he is partially right 8)


vortech doesn't make heads... n00b. 8)



Fine...belt-driven turbo. :lol:
Top
focinite
Master of Phonemic orthography
Posts: 3718
Joined: Sat Jul 02, 2005 8:32 pm
Car: black cvp vroom vroom
Location: anoka mn

if it wernt for street racing, there wouldnt be any sanctioned racing...... its not street racing thats bad its the morons that dont know when to lift!!!! :wink:
Image wink wink.....bitches
Top
Post Reply

Return to “General Discussion”