Mercury parts
- 
				ford06
- Posts: 153
- Joined: Tue Jun 16, 2009 6:19 pm
- Car: Black 01 Merc. Cougar C2
- Location: Maple Grove MN
I thought someone could help me with this.  I got my old car  from  high school today.  And it needs more work than I thought. Anyone  know where I can get parts for  a 1995 Mercury Sable other than  U Pull Em.   The interior is all modly and  crap cuz my dad spiled a milkshake in the car and never cleaned it up.  THe interior paneling is falling off, cant open the drivers side door from the inside, and   some body damage to the car.  also, hahahaha  found out my car can start WITHOUT the key today.  Someone tried stealing the car back  in  2000 and  screwed up the steering wheel column.   I thought  the key was in the ignition turned it and the car started right up. No problems at all.  Any ideas on  fixes for that? One of my friends  is moving  back here from  Michigan and hes gonna help  me rebuild the car so I have something  for work and whatnot. But in the meantime I  need a way to  fix the ignition.
            
			
									
									
						- 
				hermitmaster
- Posts: 558
- Joined: Tue Apr 21, 2009 2:59 pm
- Car: 2012 Infiniti G37x
- Location: Hugo, MN.
- Contact:
The key deal you just have to replace the cylinder. My old SHO did the same thing as did a buddies Sable. IIRC it's a somewhat common problem in that era Ford.
Should also check the headlight switch pigtail. IIRC there are 4 screws around the gauge cluster and the dash trim pulls off and then you can see the headlight switch.
I know last time I was out to Rohners there where a few Sables there, but that was 2 years ago now. But they are still there though. Guess best bet is to google junkyards and call around.
            
			
									
									Should also check the headlight switch pigtail. IIRC there are 4 screws around the gauge cluster and the dash trim pulls off and then you can see the headlight switch.
I know last time I was out to Rohners there where a few Sables there, but that was 2 years ago now. But they are still there though. Guess best bet is to google junkyards and call around.
--John
						- 
				Monkey-Gein
- Posts: 1146
- Joined: Wed Feb 25, 2009 3:38 pm
- Car: 2007 Black ZX5
- Location: Cannon Falls
what's your addressford06 wrote:also, hahahaha found out my car can start WITHOUT the key today. Someone tried stealing the car back in 2000 and screwed up the steering wheel column. I thought the key was in the ignition turned it and the car started right up. No problems at all. Any ideas on fixes for that?
A friend asked me if I wanted a frozen banana, I said "No, but I want a regular banana later, so Yeah."

07 zx3 partout viewtopic.php?f=5&t=4607
						
07 zx3 partout viewtopic.php?f=5&t=4607
- 
				ford06
- Posts: 153
- Joined: Tue Jun 16, 2009 6:19 pm
- Car: Black 01 Merc. Cougar C2
- Location: Maple Grove MN
Yea Ive been checking  around. I  know the car isnt worth much but it gets me from  point a to  point  b.  MTB sounds like a good idea.  lol.  But as for the trunk monkeys... I tihnk  ill pass lol. 
new development though...... I cant OUT of my car. Both drivers and passenger side doors you cant get out of from the inside. Me and my buudy tore apart the doors and found that the rod and clamp going from the lever on the inside of the door to the actually lock system is bent, and the window track is bending the rod even worse. We messed with it for a few hours but werent able to bend it back. The rod is stripped on the passenger side door so the rod is slipping through the clamp. Any other ideas other than just replacing the whole door?
            
			
									
									
						new development though...... I cant OUT of my car. Both drivers and passenger side doors you cant get out of from the inside. Me and my buudy tore apart the doors and found that the rod and clamp going from the lever on the inside of the door to the actually lock system is bent, and the window track is bending the rod even worse. We messed with it for a few hours but werent able to bend it back. The rod is stripped on the passenger side door so the rod is slipping through the clamp. Any other ideas other than just replacing the whole door?
- 
				ford06
- Posts: 153
- Joined: Tue Jun 16, 2009 6:19 pm
- Car: Black 01 Merc. Cougar C2
- Location: Maple Grove MN
that kona is junk.  he screwed up the engine. And there is no transmission  in  it right now plus no maintence has been done to the car in  over 2 years.  I knew it hadnt been driven for a while but not that long.  The only way I was able to get this car is because i got it for free.  I  cant get a loan  to get a car and all the places I  have looked,  everyone wants the money up front  or through a loan so I cant do  payment plans with anyone to get a car.  Trust me, I  HATE this car.  But   I  needed something for work.
            
			
									
									
						- 
				ford06
- Posts: 153
- Joined: Tue Jun 16, 2009 6:19 pm
- Car: Black 01 Merc. Cougar C2
- Location: Maple Grove MN
yea.  I asked how much he wanted if  one of my friends bought it and he was like oh well anyone else 3500 because its a Kona.  He claimed he would give it to  me for 2000 because I was family.  But still.  That would  be a waste of money.
            
			
									
									
						- 
				Monkey-Gein
- Posts: 1146
- Joined: Wed Feb 25, 2009 3:38 pm
- Car: 2007 Black ZX5
- Location: Cannon Falls
 
 um, go to walmart and buy some duct tape. duct tape will fix anything. or you can tie a string to the latch deal and just use that. a door at a upull place is cheap though
A friend asked me if I wanted a frozen banana, I said "No, but I want a regular banana later, so Yeah."

07 zx3 partout viewtopic.php?f=5&t=4607
						
07 zx3 partout viewtopic.php?f=5&t=4607



