I'm selling some of my stuff.
FR Zetec head, new. $795 local only. If using paypal, add the 3% fee. sold
Crower Zetec Stage 1 cams, new $225 local only. Add 3% fee for paypal.
I was going to use this combination for a streetable boost 6-8psi turbo set up.
I may or may not sell the remaining bare essentials of the kit:
38lb Precision injectors used lightly, very clean...look new.
Focus RS turbo manifold with heat shield. Used. One bolt for the heat shield snapped off. Not needed, but that's up to you. Both items in good condition. New bolts and gasket for manifold to head.
Garrett T-25 7 psi internal wastegate with downpipe...both new. I have not yet purchased the flange gaskets, bolts, nuts, or oil/water lines.
If someone is interested in the partial turbo kit, shoot me a pm.
I also have:
1. a new black fc 65mm tb Gen 1 w/gasket for 2000-2002.5 Zetec
2. Used black/black deamon/livewire set
3. Brand new, never used, utra rare SVT forged rods with pistons, rings, and bearings installed.
There may be more to come.
Sold or in other threads
-
- Cajun Mafia
- Posts: 2515
- Joined: Sun Aug 17, 2003 7:56 pm
- Car: 01 Street Wagon/02 ZTW
- Location: Minnesota River Valley
- Contact:
Last edited by HotRodWagon on Sat Jul 19, 2008 4:01 am, edited 3 times in total.
...always in focus...
...costra nostra tobasco

...costra nostra tobasco

-
- Resident parts whore
- Posts: 768
- Joined: Thu Jul 01, 2004 12:55 am
- Car: 2000 autumn orange zx3
- Location: Detroit, MI
what type of mods do you need to run stage one cams??
AIM: OpOrangeZX3
MNFOCUS's resident parts whore...
BOOST CREW HERE I AM.......bitches...

MNFOCUS's resident parts whore...
BOOST CREW HERE I AM.......bitches...


-
- Cajun Mafia
- Posts: 2515
- Joined: Sun Aug 17, 2003 7:56 pm
- Car: 01 Street Wagon/02 ZTW
- Location: Minnesota River Valley
- Contact:
Intake and exhaust.Pepsi50195 wrote:what type of mods do you need to run stage one cams??
...always in focus...
...costra nostra tobasco

...costra nostra tobasco

-
- Cajun Mafia
- Posts: 2515
- Joined: Sun Aug 17, 2003 7:56 pm
- Car: 01 Street Wagon/02 ZTW
- Location: Minnesota River Valley
- Contact:
Yes. $65. One of the post clips on one of the wires is missing one half of the clip. The other side is there and clips on just fine.mars wrote:will the demon livewires set work for the svtf?? and how much u want for it?
...always in focus...
...costra nostra tobasco

...costra nostra tobasco

HotRodWagon wrote:Yes. $65. One of the post clips on one of the wires is missing one half of the clip. The other side is there and clips on just fine.mars wrote:will the demon livewires set work for the svtf?? and how much u want for it?
just wondering, that's the Screamin demon coil pack and wires right? and the one wit the 1/2 clip wont move around once installed??
2004 EAP Comp. Orange Focus SVT - LOUD AZZ SVT exhaust!!!!

146.64whp/129.47tq

146.64whp/129.47tq
-
- Cajun Mafia
- Posts: 2515
- Joined: Sun Aug 17, 2003 7:56 pm
- Car: 01 Street Wagon/02 ZTW
- Location: Minnesota River Valley
- Contact:
yes, Sreamin Demon coil and black LiveWires. It fits like a normal wire without the clip...snug, but also has the clip. I do not believe the wire will move at all.mars wrote:HotRodWagon wrote:Yes. $65. One of the post clips on one of the wires is missing one half of the clip. The other side is there and clips on just fine.mars wrote:will the demon livewires set work for the svtf?? and how much u want for it?
just wondering, that's the Screamin demon coil pack and wires right? and the one wit the 1/2 clip wont move around once installed??
...always in focus...
...costra nostra tobasco

...costra nostra tobasco

-
- Resident parts whore
- Posts: 768
- Joined: Thu Jul 01, 2004 12:55 am
- Car: 2000 autumn orange zx3
- Location: Detroit, MI
like a short ram intake or a whole new mani? i have the exhaust covered....HotRodWagon wrote:Intake and exhaust.Pepsi50195 wrote:what type of mods do you need to run stage one cams??
AIM: OpOrangeZX3
MNFOCUS's resident parts whore...
BOOST CREW HERE I AM.......bitches...

MNFOCUS's resident parts whore...
BOOST CREW HERE I AM.......bitches...


-
- Cajun Mafia
- Posts: 2515
- Joined: Sun Aug 17, 2003 7:56 pm
- Car: 01 Street Wagon/02 ZTW
- Location: Minnesota River Valley
- Contact:
Not the intake manifold. Just an air intake. You may want to add cam gears to your list. If you plan on tuning the cams any.Pepsi50195 wrote:like a short ram intake or a whole new mani? i have the exhaust covered....HotRodWagon wrote:Intake and exhaust.Pepsi50195 wrote:what type of mods do you need to run stage one cams??
...always in focus...
...costra nostra tobasco

...costra nostra tobasco

-
- Resident parts whore
- Posts: 768
- Joined: Thu Jul 01, 2004 12:55 am
- Car: 2000 autumn orange zx3
- Location: Detroit, MI
how difficult are these to install? if i picked them up i would get a set of gears from like FS or somthing
AIM: OpOrangeZX3
MNFOCUS's resident parts whore...
BOOST CREW HERE I AM.......bitches...

MNFOCUS's resident parts whore...
BOOST CREW HERE I AM.......bitches...


-
- Cajun Mafia
- Posts: 2515
- Joined: Sun Aug 17, 2003 7:56 pm
- Car: 01 Street Wagon/02 ZTW
- Location: Minnesota River Valley
- Contact:
I am no mechanic. So to me, it's all difficult. I have a set of gears if you need them. Brand new too.Pepsi50195 wrote:how difficult are these to install? if i picked them up i would get a set of gears from like FS or somthing

STR Pro Gears $135 local sale only.
...always in focus...
...costra nostra tobasco

...costra nostra tobasco

-
- Resident parts whore
- Posts: 768
- Joined: Thu Jul 01, 2004 12:55 am
- Car: 2000 autumn orange zx3
- Location: Detroit, MI
well i hope someone will be able to answer that question, im sure Nils or Steve would know how.
AIM: OpOrangeZX3
MNFOCUS's resident parts whore...
BOOST CREW HERE I AM.......bitches...

MNFOCUS's resident parts whore...
BOOST CREW HERE I AM.......bitches...


-
- Cajun Mafia
- Posts: 2515
- Joined: Sun Aug 17, 2003 7:56 pm
- Car: 01 Street Wagon/02 ZTW
- Location: Minnesota River Valley
- Contact:
got itmars wrote:PM'd u
...always in focus...
...costra nostra tobasco

...costra nostra tobasco

- Steve@Tasca
- Midget
- Posts: 8928
- Joined: Fri Jan 21, 2005 1:26 pm
$135.00 is a killer price, the FRPP gears are $137.50 EACH.
Sad to see the stuff getting sold off Chalon.

Tasca Auto Group- Employee pricing on all parts.

http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com

http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com