
SVT swap's (project) car
-
- have you seen my boxers?
- Posts: 4072
- Joined: Tue Jun 21, 2005 12:11 pm
- Car: 09 Mustang GT, 14 Focus
- Location: WI
Oh your Nick's buddy who picked that shell up from Al.
Good luck, have fun! You pulling the motor/trans out of Al's Blue one?
Good luck, have fun! You pulling the motor/trans out of Al's Blue one?
Prestige WorldWide The First Word In Entertainment
______________Boats and Ho's!_____________
______________Boats and Ho's!_____________
-
- Got any WoW pron?
- Posts: 3431
- Joined: Fri Dec 23, 2005 11:33 am
- Car: ZX4x4
- Location: Saint Paul, mn
- Contact:
Pappy wrote: Oh your Nick's buddy who picked that shell up from Al.
Good luck, have fun! You pulling the motor/trans out of Al's Blue one?
eventually, Ed is yet another broke ass mechanic

-
- have you seen my boxers?
- Posts: 4072
- Joined: Tue Jun 21, 2005 12:11 pm
- Car: 09 Mustang GT, 14 Focus
- Location: WI
sc0tty8 wrote: What does he want for a shell?
I'd put in a built 3.8 v6 and make it rwd.
Depends on the cars shape.
That one (with the motor and trans), came with half an interior and no fenders, hood, or front bumper for $400.
You could get nicer more complete ones for more money.
Prestige WorldWide The First Word In Entertainment
______________Boats and Ho's!_____________
______________Boats and Ho's!_____________
- Steve@Tasca
- Midget
- Posts: 8928
- Joined: Fri Jan 21, 2005 1:26 pm
Read this article, http://www.sportcompactcarweb.com/roadt ... ord_focus/
What could be better?
I have seen those Terminator Cobra motors well over 650 HP with stock internals, There is a guy right here in town with an '03 Cobra that runs 9.50's on drag radials.
It's a street car. Don't mess with Cobras. Especially if it starts whistling instead of whining when he spools it up.

What could be better?

I have seen those Terminator Cobra motors well over 650 HP with stock internals, There is a guy right here in town with an '03 Cobra that runs 9.50's on drag radials.
It's a street car. Don't mess with Cobras. Especially if it starts whistling instead of whining when he spools it up.

Tasca Auto Group- Employee pricing on all parts.

http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com

http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
- Steve@Tasca
- Midget
- Posts: 8928
- Joined: Fri Jan 21, 2005 1:26 pm
sc0tty8 wrote: What does he want for a shell?
I'd put in a built 3.8 v6 and make it rwd.
You might as well just install a hand grenade with an undetermined timer on it.
Tasca Auto Group- Employee pricing on all parts.

http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com

http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
-
- Got any WoW pron?
- Posts: 3431
- Joined: Fri Dec 23, 2005 11:33 am
- Car: ZX4x4
- Location: Saint Paul, mn
- Contact:
FORDSVTPARTS wrote: Read this article, http://www.sportcompactcarweb.com/roadt ... ord_focus/
What could be better?![]()
I have seen those Terminator Cobra motors well over 650 HP with stock internals, There is a guy right here in town with an '03 Cobra that runs 9.50's on drag radials.
It's a street car. Don't mess with Cobras. Especially if it starts whistling instead of whining when he spools it up.
![]()
he is a poor mechanic...... thats why he will be getting stock svt parts to put into the car

- gheycobra
- Posts: 316
- Joined: Sat Apr 09, 2005 11:14 am
- Car: 03' Cobra 7 05' WRX STi
- Location: Stillwater, MN
- Contact:
FORDSVTPARTS wrote: I have seen those Terminator Cobra motors well over 650 HP with stock internals, There is a guy right here in town with an '03 Cobra that runs 9.50's on drag radials.
It's a street car. Don't mess with Cobras. Especially if it starts whistling instead of whining when he spools it up.
I got next to him this summer and he pretty much walked over my Cobra. Little did I know he was putting down a four figure horsepower number.

-Previously Fordfocuszts-