Neon Short Shifter . . .

For your Ford Focus related discussion
Post Reply
IMINHELL

Over the weekend I found out that a shifter from a neon will work in a focus. The 3rd gen neon and the early (mtx75) are basically the same. The only differance is the way the lower cable attaches to the "pin". The focus attaches from the drivers side, the neon from the passanger. Other than that they are identical and interchangeable. So if a shoft shifter for a neon happens to cost less, save yourself some $$$ and buy it instead.



John
Top
focinite
Master of Phonemic orthography
Posts: 3718
Joined: Sat Jul 02, 2005 8:32 pm
Car: black cvp vroom vroom
Location: anoka mn

IMINHELL wrote: Over the weekend I found out that a shifter from a neon will work in a focus. The 3rd gen neon and the early (mtx75) are basically the same. The only differance is the way the lower cable attaches to the "pin". The focus attaches from the drivers side, the neon from the passanger. Other than that they are identical and interchangeable. So if a shoft shifter for a neon happens to cost less, save yourself some $$$ and buy it instead.



John
yer kinda handy to have round :P 8)
Image wink wink.....bitches
Top
User avatar
sc0tty8
Posts: 1816
Joined: Fri Aug 19, 2005 10:21 am
Location: Litchfield MN

John, you should see the upper mount in the PT, its a redux, I swear, dodge and ford have the same plant in mexico....too many simularities, and, the cam gears... :shock:
Top
Post Reply

Return to “Focus Tuning & Performance”