Misc focus parts I don't need, head, cd player

sc0tty8 · Sat Jul 29, 2006 4:26 pm

Ok, here is what I got...

manifold, its a stocker I got the tb and throttle cable, has TPS and tps pigtail on it, also got he elbow that goes to the air box.

Stock exhaust, from motor back, pulled at 32k miles so its still rpetty clean I belive, will need some welding in the rear where I cut it.

ported head with upgraded valve train.

This one is a bit tricky. The head is a stage 3 ported head built for forced induction, has all ferra valve train, titanium springs/retainers/locks. Was told the valves are 1mm oversize, and the head has less then 1k miles on it. The guy I bought the head form had a fully built motor done, however, the shop did not replace a pulley for the timing belt, so some exhaust valves are bent. He said the intakes where fine and all guides where fine but some exhaust may be bent becasue they hit the pistons. I was going to send this out and have new valves installed and have the head milled, along with a valve job, and get new lash caps installed to go with the cams I was going to upgrade to. Springs are rated for iirc 12.5mm lift and 205 pound seat pressure. The guy was making 205whp with a JRSC on a break-in dyno tune/run. When I bought this I figured 200$ for new valves and it should be ready to rock. Ask on tcstangs I am sure you can find a head shop in the shitties, someone recommended c&p or taking it to hitech. This for sure I want 400$ FIRM

Pioneer 860mp. I had this in the car since maybe march-ish. There is 1 scratch on it, I have not tested it since the rollover, I'd guess it would still work but can test to see if it plays cd's, no speakers to hook it up to. Have the connector spliced on to fit 03+focus(wv plug) and I have the scoche dash kit everyone wants. I want 300$ FIRM for this, comes with box, manuals, harness, dash kit, and brand new remote.

window tint, have like 12 rolls of 35% gila scratch resisant tint

dash bezel, I had a black one I bought for my car, and I got a silver one, 30$ for either one, not selling both, 1 has to go with the car.

Crane 0012 cams, use google to find the specs, 200$.

Upper stress bar, I think its a FS, not sure.

Items with no price make offers.

I can take paypal(credit cards even) and I can ship, I have delt with some members of the board and they can vouche for me.

I need to get some cash to cover some bills from missing work and i'd like to have some cash to pay for other crap.

I can get pics if you need.

sc0tty8 · Sat Jul 29, 2006 4:38 pm

Only trades would be wheels that would fit on a PT Cruiser, suspension for a PT, or cams for a PT. Its a 2.4L non turbo.

sc0tty8 · Sun Jul 30, 2006 9:53 am

Got the ford racing cam install tools that go with the cams for club members only.

I got some patch cords I will throw in with the cd player for club members only.

sc0tty8 · Sun Jul 30, 2006 11:29 am

Cams are sold.

Pepsi50195 · Sun Jul 30, 2006 8:41 pm

are you willing toi just sell the dash kit? i need one. LMK thanks!

sc0tty8 · Sun Jul 30, 2006 8:49 pm

I'd like to keep it with the cd player, but if you made me a decent offer for the dash kit and harness I'd prob let them go. Having 1 without the other doesn't do me much good.

focinite · Sun Jul 30, 2006 9:48 pm

ported tb off the svt manii??????

Pepsi50195 · Sun Jul 30, 2006 10:52 pm

id give you 10 for just the dash piece i dont really need the harness....but let me know

sc0tty8 · Mon Jul 31, 2006 11:45 am

I get to pull the full svt manifold and throw the stocker back on

So that whole mess is avail.

focinite · Mon Jul 31, 2006 7:44 pm

sc0tty8 wrote: I get to pull the full svt manifold and throw the stocker back on

So that whole mess is avail.

f-ing SWEET!!!!!!!!!!!!!!!!! count me in for the tb and the intake snorkle tube thingy(from the tb to the air box) ill come get it from yous to save a few bones!!!!!!!!! ........if thats ok?

sc0tty8 · Wed Aug 02, 2006 8:11 am

Well I think I am going to keep the deck, the stock intake mani is going with the car, I got the full svt mani conversion pulled, and for extra shit laying around, I got 5 qts of ford oil, 1 ford oil filter, 1 brand new timing belt, 1 svt serpintine belt brand new, cam install tool kit, and ford racing wires. Since I am keeping the deck I got the kit and harness avail. I also got a CFM DSI clip for the manifold, brand new, I bought it during the group buy, its alum instead of plastic.

Pepsi50195 · Wed Aug 02, 2006 6:56 pm

how much for the kit...10?

sc0tty8 · Thu Aug 03, 2006 1:13 am

I gotta find it but prob. I also got the antenna adapter.

sc0tty8 · Thu Aug 03, 2006 11:45 am

I also got a yellow top I'd like to get rid of, I got it in the truck right now since the bird needed a batt to start so I used the truck batt.

It won't fit in the PT, and to work in a focus you need to flip the terminals around, I was going to trunk mount it.

If you want it, I'll take a brand new itnerstate lead/acid batt for the PT. I think they are like 50-70$, not sure. Yellow top has been in the truck like a month and maybe started the truck 6 times.

sc0tty8 · Thu Aug 03, 2006 11:47 am

Pepsi50195 wrote: how much for the kit...10?

I am trying to track down that dash it, I didn't see it in the focus and its not in the garage, my brother took the cd player out of the focus so I am trying to get in touch with him.