Minnesota Focus Owners Club

No thank you Steve!

Is the primer rear hatch trim still available along with the primered door & quarter moldings?

Patalrob wrote:Is the primer rear hatch trim still available along with the primered door & quarter moldings?

For that matter, is the black hatch trim available?

Primed hatch trim $98.92

Primed side mouldings $272.00 for the set

Black hatch strip $78.56

Those are all before the additional 5% off from the website.

-Steve

Steve@Tasca wrote:
Black hatch strip $78.56

-Steve

The one on the wife's car is broken on one side and she wants to replace it. Let's see if she $74.63 wants to fix it. :)

Turbo for a 99 7.3?

Patalrob wrote:Turbo for a 99 7.3?

Sorry for the delay. There's two choices based on engine tag.

Either $1039.00 plus a $250.00 core or $899.00 plus a $250.00 core.

Don't forget, the 5% off "MNFOCUS" coupon code does apply to knock another $50.00 or so off those numbers.

-Steve

Thanks Steve I'll pass it onto my friend that is looking.

Steve, finally time to look at getting two more 16" wheels off the stock focus for my ST. Let me know your price!

Macky21 wrote:Steve, finally time to look at getting two more 16" wheels off the stock focus for my ST. Let me know your price!

Hey Sam, With the extra 5% off coupon and shipping you're at $196.04 to your door. Probably close to a wash with buying them locally and paying tax.

Let me know if you want to get them, I saved them on quote Q368755.

-Steve

Hi Steve,

Could you give me a quotes on the right CV shaft and the CV axel clamp assembly thingy for a 2003 ford focus SVT ZX3? Is everything dropshipped now? I'm still living in the White Bear area.

Thanks,
Jake

I have discovered that it is a bit hard to find a replacement for the right CV shaft hanger bracket. The guys at Ford dealer told me the part number was 3S4Z-3K305-HA. Any chance you would be able to order one up for me or point me in the right direction?

Big Boy wrote:I have discovered that it is a bit hard to find a replacement for the right CV shaft hanger bracket. The guys at Ford dealer told me the part number was 3S4Z-3K305-HA. Any chance you would be able to order one up for me or point me in the right direction?

Well first off that's the wrong part number for an SVT, next I'm wondering if you need the actual bracket that bolts to the block or just the strap that retains the hanger bearing to the bracket?

I work for Tasca out of R.I. now so anything I sell you has to be shipped, on the other hand now you don't pay sales tax.

-Steve

Steve@Tasca wrote: Well first off that's the wrong part number for an SVT, next I'm wondering if you need the actual bracket that bolts to the block or just the strap that retains the hanger bearing to the bracket?

I actually need the part that mounts to the block. I have a new CV/axle assembly as well as a new cap/strap on the way, but the main bracket attached to the engine is damaged beyond repair. That is the part I need.

This is what it should look like.