P0325

For your Ford Focus related discussion
Post Reply
User avatar
screaming4snow
Posts: 95
Joined: Tue Dec 29, 2009 10:00 pm
Car: 03 Screaming Yellow SVT
Location: Apple Valley

I know Its the knock sensor 1 circut...

But what does that mean??
Kev
2003 Screaming Yellow
#3921 of 3985
User avatar
Steve@Tasca
Midget
Posts: 8928
Joined: Fri Jan 21, 2005 1:26 pm

screaming4snow wrote:I know Its the knock sensor 1 circut...

But what does that mean??
Looks like it's either detecting knock or it's a bad sensor or bad PCM. What are you running for fuel and what tune is in the car?

P0325 - Knock Sensor 1 Circuit Malfunction (Bank 1) See DTC P0326

P0326 - Knock Sensor 1 Circuit Range/ Performance (Bank 1) The knock sensor detects vibrations upon increase and decrease in engine rpm. The knock sensor generates a voltage based on this vibration. Should this voltage go outside a calibrated level a DTC will set. Knock sensor circuit short to GND
Knock sensor circuit short to PWR
Knock sensor circuit open
Damaged knock sensor
Damaged PCM
A knock sensor voltage greater than 0.5V with the key ON and engine OFF indicates a hard fault.
Tasca Auto Group- Employee pricing on all parts.
Image
http://www.tascaparts.com/partlocator/i ... eid=213668

1-800-598-1484 or spowell@tasca.com
User avatar
screaming4snow
Posts: 95
Joined: Tue Dec 29, 2009 10:00 pm
Car: 03 Screaming Yellow SVT
Location: Apple Valley

FORDSVTPARTS wrote:Looks like it's either detecting knock or it's a bad sensor or bad PCM. What are you running for fuel and what tune is in the car?
its an 03 svt, premium gas only

its the stock tune that was "re-tuned" by ford years before i bought it.
Kev
2003 Screaming Yellow
#3921 of 3985
Post Reply