NEED TO BORROW
I'd be willing to lend you mine, but I didn't see this sooner. I'll be out of town for work all week, but if you were willing to drive up to St Paul, I could have my wife put it on the porch for you to pick up.
Focus: singular
Foci: plural
Not interchangeable
Foci: plural
Not interchangeable
I might hit you up with that! My buddy doing all this work on my car with me needs to make a trip to the cities. PM me your number and I'll give you a ring if that's the route I go. I may just order one and wait until later this week for the timing belt, the LSD install, rear main seal and high pressure line for power steering will probably keep us busy tomorrow!
Wish me luck!
Wish me luck!
if that doesn't work, I've got the tools in Rochester
00' Kona
I got your message, but my wife is already in bed and I doubt I'm going to be able to catch her before she heads to work tomorrow.
Focus: singular
Foci: plural
Not interchangeable
Foci: plural
Not interchangeable
Let me know how the LSD install goes. I'm going to be putting in a new clutch in a few weeks and was thinking of putting in a Torsen while the tranny was out.
Paul
Red 2001 ZX3 I/H/E, UDP and FR2's, KW Variant 1, kids car
Red 2005 ZX3 FSW Stage 2 Turbo, FSW Stealth Exhaust, Steeda springs, KYB AGX, 3dCarbon body, Custom leather.
Green 2000 Windstar, Stock, Wifes car/vacation vehicle
Red 2001 ZX3 I/H/E, UDP and FR2's, KW Variant 1, kids car
Red 2005 ZX3 FSW Stage 2 Turbo, FSW Stealth Exhaust, Steeda springs, KYB AGX, 3dCarbon body, Custom leather.
Green 2000 Windstar, Stock, Wifes car/vacation vehicle
- CrazySVTChick
- Posts: 373
- Joined: Thu Jun 05, 2008 6:23 pm
- Car: 2003 Ford Focus SVT EAP
- Location: Woodbury
Putting the LSD in is VERY easy!! When I did mone it just poped right in and the spacers were perfect!PBZX3 wrote:Let me know how the LSD install goes. I'm going to be putting in a new clutch in a few weeks and was thinking of putting in a Torsen while the tranny was out.
Good luck on the install Miller!
TURBO BABY!!!
-
- Posts: 334
- Joined: Sat Mar 15, 2008 2:31 pm
- Car: '07 Focus ST (supertight)
- Location: North St. Paul, MN
Speaking of which, I haven't heard from you. Everything driving ok???CrazySVTChick wrote:Putting the LSD in is VERY easy!! When I did mone it just poped right in and the spacers were perfect!PBZX3 wrote:Let me know how the LSD install goes. I'm going to be putting in a new clutch in a few weeks and was thinking of putting in a Torsen while the tranny was out.
Good luck on the install Miller!
LSD was fairly straight forward. Kinda scary doing bearing races, but the video online of it helped a lot. Not nearly as hard as getting the trans out.
Found out it was just my slave leaking, when installed the seal around the input shaft folded over on itself in one spot. Sprayed everywhere. Threw the clutch in a powder coat oven at school at 400 and could watch the oil come to the service and smoke off. Everything is back together and working great.
Didn't get to timing belt because the tool, will do it soon though.
Found out it was just my slave leaking, when installed the seal around the input shaft folded over on itself in one spot. Sprayed everywhere. Threw the clutch in a powder coat oven at school at 400 and could watch the oil come to the service and smoke off. Everything is back together and working great.
Didn't get to timing belt because the tool, will do it soon though.