Well, hopefully anyways!!!
Three days ago I started tearing into my motor to put in a new cylinder head and intake manifold on. Two days ago I went on a 25-30 mile bike ride and pinched both ulnar nerves and can no longer use either of my pinky or ring fingers.
Anyone who knows what they're doing want to help a guy out this weekend or anytime next week? I can supply beer, and I have all the tools necessary
cylinder head/intake manifold g2g!!!
-
- Posts: 70
- Joined: Wed Aug 06, 2008 2:01 pm
Last edited by OrbitusXpandeR on Tue Jul 20, 2010 8:40 pm, edited 1 time in total.
-
- Posts: 672
- Joined: Mon Feb 22, 2010 9:30 pm
- Car: 01 Canary Yellow zzzZX3
location location location.
-
- Posts: 70
- Joined: Wed Aug 06, 2008 2:01 pm
- Steve@Tasca
- Midget
- Posts: 8928
- Joined: Fri Jan 21, 2005 1:26 pm
I "might" be available this weekend, depends if I get done with installing the engine and trans in the neighbors truck.
Tasca Auto Group- Employee pricing on all parts.
http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
-
- Posts: 672
- Joined: Mon Feb 22, 2010 9:30 pm
- Car: 01 Canary Yellow zzzZX3
I cant this weekend at all, but id be willing to try and get out next week maybe.
-
- Posts: 70
- Joined: Wed Aug 06, 2008 2:01 pm
- Steve@Tasca
- Midget
- Posts: 8928
- Joined: Fri Jan 21, 2005 1:26 pm
I've spent about the last three weeks swapping engines in two Dodge diesel pickups, one is done and the other has been delayed by issues getting clutch parts, engine and trans mounts but hopefull it'll be done over the next few nights.
Tasca Auto Group- Employee pricing on all parts.
http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
-
- Posts: 70
- Joined: Wed Aug 06, 2008 2:01 pm
I'm off Thursday/Friday, I'd be up for some wrench time.
2008 Bone Stock VW GLI
2004 Sonic Blue SVT ZX3, #1593 of 1978 Born 4/8/04
Stage 2 ported TB, Semi-custom Borla center exit, FSWerks CAI, FS front strut bar, suspension by FR/Multimatic gone, but not forgotten
2004 Sonic Blue SVT ZX3, #1593 of 1978 Born 4/8/04
Stage 2 ported TB, Semi-custom Borla center exit, FSWerks CAI, FS front strut bar, suspension by FR/Multimatic gone, but not forgotten
- Steve@Tasca
- Midget
- Posts: 8928
- Joined: Fri Jan 21, 2005 1:26 pm
I've done plenty of this stuff, got the trans and engine mated up in the truck tonight and we'll be putting together the puzzle that is the trans crossmember tomorrow along with the transfer case and whatever else we can get done.OrbitusXpandeR wrote:Good luck with that!! This was my first tme delving in this deep, so it WAS fun, right up until I lost the use of four of my fingers
Tasca Auto Group- Employee pricing on all parts.
http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
I need money worse than food, no job kinda does that ... and I don't drink.
Had to look on the map where Robbinsdale is, looks easy enough to get to and at least it's on the west side.
I'd come by and do it for $20.
I'm open Friday, Saturday or Sunday.
Had to look on the map where Robbinsdale is, looks easy enough to get to and at least it's on the west side.
I'd come by and do it for $20.
I'm open Friday, Saturday or Sunday.
--John
-
- Posts: 70
- Joined: Wed Aug 06, 2008 2:01 pm
-
- Posts: 70
- Joined: Wed Aug 06, 2008 2:01 pm
9am
I don't wake up before noon, yes I'm a true deadbeat.
How's about around 2pm tomorrow.
Not sure what you've all got torn apart but shouldn't take more than an hour or 2 to get back together.
I don't wake up before noon, yes I'm a true deadbeat.
How's about around 2pm tomorrow.
Not sure what you've all got torn apart but shouldn't take more than an hour or 2 to get back together.
--John