Page 2 of 2
Re: I need opinion on lowering
Posted: Tue May 04, 2010 7:46 am
by ZX3_HORNET_RACER
Im not afraid to bend the rules, by swaping in factory svt parts or cutting/modifiying stock parts.
There are several cars out there with BUILT motors, and totally custom suspension.
Re: I need opinion on lowering
Posted: Tue May 04, 2010 12:23 pm
by hermitmaster
If you're running circle track, just cut the outside spring to reduce outward body roll.
Re: I need opinion on lowering
Posted: Thu May 06, 2010 7:09 pm
by ClOckwOrkSVT
as someone that has and races hornet cars, you don't want the camber adjusted like you said. that'll induce body roll. if you want to help your issue, lower the inside (driver's side) of the car. we run a saturn and haven't had any issues. 240k miles, 200 laps at cedar lake. started 98th, ended 12th. woo!
Re: I need opinion on lowering
Posted: Thu May 06, 2010 7:52 pm
by ZX3_HORNET_RACER
most off the competitive cars around here have positive camber on the passengers side and negitive camber on the drivers side. (like any circle trsck cars from street stocks to nascar) so i dont see how that would be a bad thing.
Re: I need opinion on lowering
Posted: Tue May 11, 2010 10:01 pm
by goinloco1
And if you want some serious performance this place rocks...
for performance grab a set of these and see what happens
http://kalecoauto.com/index.php?main_pa ... ducts_id=4
and an effective and cheap drop...
http://kalecoauto.com/index.php?main_pa ... ucts_id=11
and for ultimate traction...
http://kalecoauto.com/index.php?main_pa ... ucts_id=38
sorry... had to