Suspension in progress...

OrbitusXpandeR · Mon Apr 19, 2010 11:58 pm

Picked up an Eibach kit with sway-bars and all three FSWerks stress-bars some time ago and finally found the time to start the install this week. Sooooo.... After nine hours, four snapped bolts, cuts and scrapes on just about every finger, exploding brake fluid and my eyes swelling from rust flying into them I CAN OFFICIALLY SAY: i don't even have the god-damn knuckles off yet, lol. I suck at cars

Tue Apr 20, 2010 12:16 am

I'm officially a wrench tard. It sucks.

Stilz · Tue Apr 20, 2010 5:00 am

Sounds like you're having fun. I get to partake in this today myself...

now you got me all worries.

hafftrak · Tue Apr 20, 2010 6:38 am

I did my struts and shocks a couple weeks ago, and I was amazed at how easily everything came apart. Out-of-state cars FTW!

hermitmaster · Tue Apr 20, 2010 7:11 am

hafftrak · Tue Apr 20, 2010 7:22 am

That's what I use too. PB Blaster is good stuff. Kroil is the best off the shelf stuff hands down, but you can't buy it retail.

Here's a good article on rust penetrants:

http://grassrootsmotorsports.com/tech-tips/55/

Tue Apr 20, 2010 7:30 am

Just did shocks, struts and springs in my SVT yesterday and we did the suspension and a rear bar in Pappys 100k plus beater as well and got through without a single broken bolt and very little swearing

Tue Apr 20, 2010 8:06 am

Word. My beater took a little extra breaker bar and impact assistance, 100k mile minnesota cars ftl.... On a side note it handles great and looks got now ha ha

Tue Apr 20, 2010 9:26 am

I forgot to mention the handling, it's like having a new car again.

Multimatic suspension FTW!!

Tue Apr 20, 2010 9:30 am

You guys are really pissing me off with all this work you are doing on your cars. My wagon's been neglected for years. Nothing fun or nice to see. Poor wagon

.

hafftrak · Tue Apr 20, 2010 10:18 am

HotRodWagon wrote:You guys are really pissing me off with all this work you are doing on your cars. My wagon's been neglected for years. Nothing fun or nice to see. Poor wagon .

Yeah, but your wagon is still cooler than my car.

Monkey-Gein · Tue Apr 20, 2010 10:42 am

hafftrak wrote:
HotRodWagon wrote:You guys are really pissing me off with all this work you are doing on your cars. My wagon's been neglected for years. Nothing fun or nice to see. Poor wagon .

Yeah, but your wagon is still cooler than my car.

X2

OrbitusXpandeR · Tue Apr 20, 2010 1:07 pm

Alright, so I've been hacking away at these bolts on the knuckles that clamp the ball joints in for a day and a half now. Heat gun to get it nice and warm, pb blaster and an air hammer and neither side is budging at all. Wtf do I do now... any ideas? also, as I'm now a day and a half behind schedule anybody feel like helping throw in an eibach kit and some sways in the robbinsdale area? Tonight or any time this week? Maybe? I'll buy beers! 612-558-1894

Tue Apr 20, 2010 1:24 pm

You could try a propane torch, just be sure to stay away from your CV boots and any other flamable bits.

I've used an air hammer for that exact thing before with no trouble at all, have you tried a big hammer? Once again watching out for the CV boots.

I'd volunteer but with the kids and my wifes schedule I wouldn't have any time until the weekend.

OrbitusXpandeR · Tue Apr 20, 2010 1:32 pm

Yup. Big hammer no workey