Anyone willing to stop by with there 16v zetec so I can see how some stuff gets hooked up, and what I might be missing.
I live in Columbus (between Lino Lakes and Forest Lake)
Thanks
zetec help
- Steve@Tasca
- Midget
- Posts: 8928
- Joined: Fri Jan 21, 2005 1:26 pm
What are you trying to hook up? Is it a normal Zetec or your SVT?
The Zetec and SVT plumbing and wiring are very similar.
The Zetec and SVT plumbing and wiring are very similar.
Tasca Auto Group- Employee pricing on all parts.
http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
Bracket fits on the front side of the TB (facing you) and the cables will be on the left side. Should take 3 phillips screws to hold the bracket in place.
Just like this looking at it (but with a bracket)
Grey 3 wire plug is for the DP(whatever) sensor on the EGR pipe to the intake (left in the pic).
Black 2 wire is for the part mounted to the firewall (center pic).
Just like this looking at it (but with a bracket)
Grey 3 wire plug is for the DP(whatever) sensor on the EGR pipe to the intake (left in the pic).
Black 2 wire is for the part mounted to the firewall (center pic).
--John