Sway Bar discussion. (AutoX related)
-
- Posts: 1472
- Joined: Mon Mar 10, 2008 11:15 pm
- Car: Pitch Black 2007 ZX3 S
- Location: STC
- Contact:
So on the spring arms there is the corrct place for the bar to be bolted into it, but I can't seem to find the other spot, where it bolts to the frame. Here's a pic of what I have compared to o2.
Is that just part of the endlink kit (have yet to order) or am I screwed?
Is that just part of the endlink kit (have yet to order) or am I screwed?
Eibach | Tokico | Ford Racing | Magnaflow | F2 USA | Steeda | Crane
-
- Making skinny jeans look baggy since 2009
- Posts: 8253
- Joined: Sun Feb 13, 2005 3:27 pm
- Car: Bone Stock Focuseses
- Location: Rochester
Then you might be needing this...
http://www.steedafocus.com/store/Suspen ... _info.html
http://www.steedafocus.com/store/Suspen ... _info.html
Pants too tight, wheels so bright!
-
- Posts: 1472
- Joined: Mon Mar 10, 2008 11:15 pm
- Car: Pitch Black 2007 ZX3 S
- Location: STC
- Contact:
Where does that bolt on to? I thought I had the holes for it but when I was looking there was no way that it would work.
I'll be buying the end links from MassiveSS ($25) this weekend.
I'll be buying the end links from MassiveSS ($25) this weekend.
Eibach | Tokico | Ford Racing | Magnaflow | F2 USA | Steeda | Crane
or you can do good solidly welded mounts for about 10$ and a welder. very simple to do and wont loosen and slip like the steeda so often end up doing.
http://www.focusfanatics.com/forum/show ... p?t=133486
http://www.focusfanatics.com/forum/show ... p?t=133486
-
- Posts: 1472
- Joined: Mon Mar 10, 2008 11:15 pm
- Car: Pitch Black 2007 ZX3 S
- Location: STC
- Contact:
Yea, it took me a month to finally look at it, lol. I DON'T have that thing that is welded on. Is this other thing what I need to put it in place?o2designs wrote:Hope this helps...
o2designs wrote:Then you might be needing this...
http://www.steedafocus.com/store/Suspen ... _info.html
Eibach | Tokico | Ford Racing | Magnaflow | F2 USA | Steeda | Crane