Custom Fiberglass speaker enclosure Project.

Show off your pictures!!!
Post Reply
User avatar
spooty2y
Posts: 24
Joined: Wed Jul 21, 2004 10:51 am
Location: Hutchinson, MN
Contact:

This is my project for the weekend, I am trying to figure out if I should put a 15" in there or a 12" I am caculating roughly 2 1/2 cubic feet of air space. not sure how bad it will rattle if I put the 15" in there, my next plans are to stabilize it a little with some MDF wood.

*This is my first time working with fiberglass.

Here are some pictures.

This is just my plain car.

Image

Here it is with the outer shell that I fabricated.

Image

Front Shot out of the car.

Image

Back Shot out of the car.

Image

And this is the carboard template that I am going to use to make the front

Image
[/b]
2004 Focus ZX3 2.3L Duratec


"If at first you don't succeed, try management."
User avatar
spooty2y
Posts: 24
Joined: Wed Jul 21, 2004 10:51 am
Location: Hutchinson, MN
Contact:

Here is the latest, I have not hooked it up to hear it yet. but it looks nice.

Image
Image
Image
Image
Image
2004 Focus ZX3 2.3L Duratec


"If at first you don't succeed, try management."
Louis Zerr
and so it lives.
Posts: 1383
Joined: Tue Aug 12, 2003 9:24 am
Location: Mayer, MN

Lookin' good, let's blow that motha up! :twisted:
Slower than your stock focus.
User avatar
spooty2y
Posts: 24
Joined: Wed Jul 21, 2004 10:51 am
Location: Hutchinson, MN
Contact:

Hell yeah, I am waiting for my new head unit to arrive.
2004 Focus ZX3 2.3L Duratec


"If at first you don't succeed, try management."
User avatar
spooty2y
Posts: 24
Joined: Wed Jul 21, 2004 10:51 am
Location: Hutchinson, MN
Contact:

almost forgot, here is how much room I have left in the back.

Image
2004 Focus ZX3 2.3L Duratec


"If at first you don't succeed, try management."
Post Reply