Page 1 of 1
Need to get some estimated parts values-help!
Posted: Tue Sep 04, 2007 11:26 am
by Steve@Tasca
O.K. guys, Need to get some values on some used parts. I never shop this stuff and some is pretty scarce. I'm looking into this for Al.
Full EAP interior for a ZX3 including seats and door/quarter trim.
SVT brake conversion.
SVT engine and trans.
Has one good HID but I don't remember which side.
Plus other misc bits, The car was a roll over and is an '04 with 37,000 on it. I guess it's real clean and no airbags were blown.
I guess it even has good tires but the wheels are scuffed up.
He has the whole car but it's not driveable due to a broken ball joint/control arm.
Re: Need to get some estimated parts values-help!
Posted: Tue Sep 04, 2007 1:21 pm
by Pappy
FORDSVTPARTS wrote:O.K. guys, Need to get some values on some used parts. I never shop this stuff and some is pretty scarce. I'm looking into this for Al.
Full EAP interior for a ZX3 including seats and door/quarter trim.
$1500
SVT brake conversion.
$400
SVT engine and trans.
$1200-1500 dependant on what goes with it
Has one good HID but I don't remember which side.
$150
Plus other misc bits, The car was a roll over and is an '04 with 37,000 on it. I guess it's real clean and no airbags were blown.
I guess it even has good tires but the wheels are scuffed up.
He has the whole car but it's not driveable due to a broken ball joint/control arm.
Thats what I see it all going for.
Re: Need to get some estimated parts values-help!
Posted: Wed Sep 05, 2007 12:15 pm
by Steve@Tasca
Come on, All you guys looking and only Pappy has an idea of the value of this stuff?
I'm just doing this to help Al, He doesn't get on here to post all that much so I told him I'd check it out.
Come on Kyle, I know you have those seats in Chromie. What did you pay for them?
Re: Need to get some estimated parts values-help!
Posted: Wed Sep 05, 2007 3:13 pm
by focinite
motor and trans/drive train=800bucks i got mine from al for 800 and it had 6060 on the odometer
inter all together= 1200
lights=100
wheels=150(scuffed)
brakes depeding if the rotors and pads and lines and cables are good 500
Re: Need to get some estimated parts values-help!
Posted: Wed Sep 05, 2007 7:51 pm
by spots25
FORDSVTPARTS wrote:
Come on Kyle, I know you have those seats in Chromie. What did you pay for them?
Kyle got a screaming deal on those seats, I think he paid like 800 for them... but they're worth a little under twice that
Re: Need to get some estimated parts values-help!
Posted: Wed Sep 05, 2007 10:02 pm
by o2designs
I already posted in here, but for some reason it did'nt post...
these guys are pretty close to the price of stuff. I think Pappy is pretty close on everything.
The seats I've seen sell, if they are in PERFECT condition, go for 1500+. not including the door cards.
Is it a 3dr or 5dr?
I'd be interested in the steering wheel if Al gets this car...
Re: Need to get some estimated parts values-help!
Posted: Thu Sep 06, 2007 8:37 am
by Steve@Tasca
o2designs wrote:I already posted in here, but for some reason it did'nt post...
these guys are pretty close to the price of stuff. I think Pappy is pretty close on everything.
The seats I've seen sell, if they are in PERFECT condition, go for 1500+. not including the door cards.
Is it a 3dr or 5dr?
I'd be interested in the steering wheel if Al gets this car...
It's a 3-door and he already has it. He says the entire car was in beautiful shape before it was rolled. I already reserved the Audiophile head unit for my car
Re: Need to get some estimated parts values-help!
Posted: Thu Sep 06, 2007 10:04 am
by o2designs
Thats fine. If you speak to Al, let him know I'm interested in the steering wheel and the flex pipe.