Page 1 of 1
					
				Feeler: 17" Wheels
				Posted: Tue May 29, 2007 10:35 pm
				by zurno
				
			 
			
					
				Re: Feeler: 17" Wheels
				Posted: Wed May 30, 2007 8:41 am
				by 19-Delta
				Might help if you posted the:
Brand
Offset
Weight
Hub size
Just a crazy thought.
Tim
			 
			
					
				Re: Feeler: 17" Wheels
				Posted: Wed May 30, 2007 9:16 am
				by o2designs
				They are Kosei's. I think they were a 42-45mm offset.
			 
			
					
				Re: Feeler: 17" Wheels
				Posted: Wed May 30, 2007 5:27 pm
				by zurno
				19-Delta wrote:
Might help if you posted the:
Brand
Offset
Weight
Hub size
Just a crazy thought.
Tim
 
Kosei Racing Seneca
Wheelweights.net says it is 21.5 pounds per wheel
besides that I know that it fits the focus and looks like that on the car
also the alt bolt pattern may be 4x100
 
			 
			
					
				Re: Feeler: 17" Wheels
				Posted: Wed May 30, 2007 5:40 pm
				by o2designs
				I'll take me for FREE! But otherwise, good luck Nick.
			 
			
					
				Re: Feeler: 17" Wheels
				Posted: Wed May 30, 2007 6:54 pm
				by zurno
				that is why this is a feeler, I woul't just give these away, but if someone seriously wanted them and was willing to pay a little I may let them go
			 
			
					
				Re: Feeler: 17" Wheels
				Posted: Wed May 30, 2007 7:00 pm
				by soul_hammer
				i would take them off youre hands for a 100 or so with out tires if they have good rubber i could go 150 to 200. but i would have to find a way to make them black.
			 
			
					
				Re: Feeler: 17" Wheels
				Posted: Wed May 30, 2007 8:37 pm
				by 19-Delta
				soul,
Go over to FJ and do a search on Painting in the Wheel forum and you will see some very good posts. Looks like all you need is some good prep, a can of Duplicolour Wheel Paint, and the same in Clear Coat. The results that some of the guys posted are factory quality.  Also, sounds like it holds up quite will also to the abuse wheels go through.
Of course no one is going to post a picture when their wheels turned out like some 13 year old just discovery spray paint did the job.
Good Luck,
Tim
			 
			
					
				Re: Feeler: 17" Wheels
				Posted: Wed May 30, 2007 9:42 pm
				by o2designs
				I painted mine with the DuliColor. Turned out great. But I can't say the same for the color.
DupliColor, for as far as I can find, does'nt make a Black. So I'm using regular auto paint, then going over my rims with Wheel Clear. We'll see how that turns out.
			 
			
					
				Re: Feeler: 17" Wheels
				Posted: Wed May 30, 2007 9:53 pm
				by Deagle50ae
				I was very pleased with the duplicolr wheel paint when I painted my RX7's wheels Gunmetal. it applies well and didn't run at all.
prep is going to be the key here because I washed every mm of those wheels with a toothbrush and detergent.
			 
			
					
				Re: Feeler: 17" Wheels
				Posted: Thu May 31, 2007 3:48 pm
				by SVT-swap
				If you sell these, I will beat you! Well they are at my house so, I guess I could just hide them......on my car