Minnesota Focus Owners Club

are there any shops in mn that have a dyno and offer sct tuning, i ask because i would like to get me car dyno tuned/sct tuned within 2 months, i want to do it in one shot there has to be somewhere.

DB performance in Rogers does it, you will be looking at about 500$ for the hardware/tune/dyno time and thats not even dialing in your cam gears, which is just obsurd for that kind of money, they told me it would prob be an additional 2 hours of dyno time to dial in my cams, at 125$ an hr, so for me to get tuned would have been pushing 700+ easy, they told me 2 hours just to make a new fuel map:roll:

Massive in chicago area has a lot more experience with the focus, not sure what their rates are, I think someone on FJ said they we 75$/hr for tuning.

Oh, what kind of work do you got done? Being you are in green bay, I'd check massive speed systems for sure.

massive speed doesnt have a dyno, and the shop they source to charges like 150 an hour, they also dont tune sct, it should take about an hour to tune camgears, 125 is pretty standard, i have an xcal already, id just neew an updated file, do you have a number for this place or a website.

I just bought a data logger and got it over with. I have yet to install it. But I'm just gonna email the files to Randy at FocusSport.

o2designs wrote: I just bought a data logger and got it over with. I have yet to install it. But I'm just gonna email the files to Randy at FocusSport.

Your xcal2 is a data logger...

http://www.dbperformancetuning.com/

its an xcal 1, and i dont really need to dtdalog, i just want to get the afr right do i dont blow anything up and then tune the camgears, ig figure about 5 runs for the gears and i dont know about the afr.

98gsxltd wrote: its an xcal 1, and i dont really need to dtdalog, i just want to get the afr right do i dont blow anything up and then tune the camgears, ig figure about 5 runs for the gears and i dont know about the afr.

DB told me 2 hours for AFR and 175 for the file. First 2 hours are 150$ after that its 125$.

wow that place seems a little expensive....when i dyno tuned my camgears the first time, it was 125 an hour and 30 for the file w/afr......i think ill wait till next summer to put the jrsc in and tune it in wi.

Exactly why I didn't get my car tuned. Those prices where also with me providing my own xcal2. 700$ to get tuned and pick up maybe 10-12whp? Na, I'll pass. But now I got this tbird I am going to slowly put the focus back to stock. The ported head I got, the prev owner made 205whp with a JRSC

You should buy it, it needs to be gone thru to make sure its all good, I was going to have it gone thru, the prev owner claims a few of the exhaust valves might be bent, valves are about 40$ a pop, ferra super alloy valve train with titanium springs/retainers Springs are good for 12.5mm lift.

sc0tty8 wrote:

o2designs wrote:I just bought a data logger and got it over with. I have yet to install it. But I'm just gonna email the files to Randy at FocusSport.

Your xcal2 is a data logger...

http://www.dbperformancetuning.com/

Sorry, I meant the 02 sensor logger. An Innovate LC-1

ah a wideband o2, next summer ill buy one, right now im going to run the jr bbk tune, i put less than 2k miles on my car durring the school year.

Wrong. Massive Speed Systems doesn't have a dyno or tune but they have a lil shop where they can bring you call Logan Motorsports. Besides this last time I've gotten all my tuning done through them and seeing as how the place in Roger's has F%$#%& outrageous prices I'll prob end up driving out there to get it tuned again. It's about a 6 hour drive to Massive and another hour to the tuner. If anyone wants to go down there let me know cause I gotta get mine tuned again.

im planing on driving out to PA, to see Ray at McNews, to get my tune.