Hey,
Looking for any info on mating a focussport front lip onto a svtbumper.
Any info from other sites would be greatly appreciated, or if you could post on there for me, it would be very appreciated.
Thanks!
Corey
Info on FS Lip to svtbump
-
- Posts: 558
- Joined: Tue Apr 21, 2009 2:59 pm
- Car: 2012 Infiniti G37x
- Location: Hugo, MN.
- Contact:
-
- Cajun Mafia
- Posts: 2515
- Joined: Sun Aug 17, 2003 7:56 pm
- Car: 01 Street Wagon/02 ZTW
- Location: Minnesota River Valley
- Contact:
Never seen it done. They made of fiberglass and carbon fiber (read no flex like the Mach 1) so it best be a direct fit. You will be it hero if you pull it off, but they are already so rare since they were discontinued 3-4 years ago, they are real hard to come by. If you already have one, hang tape it into place to check the fitment. If it's a go, a mix of 3m double sided tape may help, but screws are definitely in your future.
...always in focus...
...costra nostra tobasco
...costra nostra tobasco
-
- Posts: 558
- Joined: Tue Apr 21, 2009 2:59 pm
- Car: 2012 Infiniti G37x
- Location: Hugo, MN.
- Contact:
Ya' learn something new every day. I didn't know they were made of glass.HotRodWagon wrote:Never seen it done. They made of fiberglass and carbon fiber (read no flex like the Mach 1) so it best be a direct fit. You will be it hero if you pull it off, but they are already so rare since they were discontinued 3-4 years ago, they are real hard to come by. If you already have one, hang tape it into place to check the fitment. If it's a go, a mix of 3m double sided tape may help, but screws are definitely in your future.
-
- Posts: 672
- Joined: Mon Feb 22, 2010 9:30 pm
- Car: 01 Canary Yellow zzzZX3
Well thats not much help!
I started today and im thinking ill just have to make a few sheet metal brackets. Hope it goes well.
Slowly but surely haha
When i bought it off you, you said its been done. I did see the picture you had up, but it looks like it may have been deleted.
I started today and im thinking ill just have to make a few sheet metal brackets. Hope it goes well.
Slowly but surely haha
When i bought it off you, you said its been done. I did see the picture you had up, but it looks like it may have been deleted.
-
- Posts: 672
- Joined: Mon Feb 22, 2010 9:30 pm
- Car: 01 Canary Yellow zzzZX3
this may be impossible. seems too short, contemplating cutting the ends off.....
-
- Posts: 558
- Joined: Tue Apr 21, 2009 2:59 pm
- Car: 2012 Infiniti G37x
- Location: Hugo, MN.
- Contact:
-
- Posts: 672
- Joined: Mon Feb 22, 2010 9:30 pm
- Car: 01 Canary Yellow zzzZX3
what happened?
-
- Cajun Mafia
- Posts: 2515
- Joined: Sun Aug 17, 2003 7:56 pm
- Car: 01 Street Wagon/02 ZTW
- Location: Minnesota River Valley
- Contact:
First off I have never sold an FS lip, ever. You bought a Ford Accessory/S2 lip.WASaZX3pos wrote: When i bought it off you, you said its been done. I did see the picture you had up, but it looks like it may have been deleted.
Second, I did say it has been done, and posted the pictures. I also said I did not know how it was installed/what was done to install it, nor what the fit would be like, other than it has been fitted as seen in the pictures.
...always in focus...
...costra nostra tobasco
...costra nostra tobasco
- Steve@Tasca
- Midget
- Posts: 8928
- Joined: Fri Jan 21, 2005 1:26 pm
Seems pretty clear cut to me.HotRodWagon wrote:First off I have never sold an FS lip, ever. You bought a Ford Accessory/S2 lip.WASaZX3pos wrote: When i bought it off you, you said its been done. I did see the picture you had up, but it looks like it may have been deleted.
Second, I did say it has been done, and posted the pictures. I also said I did not know how it was installed/what was done to install it, nor what the fit would be like, other than it has been fitted as seen in the pictures.
Tasca Auto Group- Employee pricing on all parts.
http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
-
- Posts: 672
- Joined: Mon Feb 22, 2010 9:30 pm
- Car: 01 Canary Yellow zzzZX3
huh?FORDSVTPARTS wrote:Seems pretty clear cut to me.HotRodWagon wrote:First off I have never sold an FS lip, ever. You bought a Ford Accessory/S2 lip.WASaZX3pos wrote: When i bought it off you, you said its been done. I did see the picture you had up, but it looks like it may have been deleted.
Second, I did say it has been done, and posted the pictures. I also said I did not know how it was installed/what was done to install it, nor what the fit would be like, other than it has been fitted as seen in the pictures.
- Steve@Tasca
- Midget
- Posts: 8928
- Joined: Fri Jan 21, 2005 1:26 pm
Seems pretty clear cut to me.[/quote]WASaZX3pos wrote:
huh?[/quote]
The lip you bought is an old Ford accessory kit, not an FS lip.
The picture Hotrodwagon posted is of an SVT with that lip on it to show that it has been done, it's up to you to figure out how to do it though.
-Steve
.
Tasca Auto Group- Employee pricing on all parts.
http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
http://www.tascaparts.com/partlocator/i ... eid=213668
1-800-598-1484 or spowell@tasca.com
-
- Posts: 672
- Joined: Mon Feb 22, 2010 9:30 pm
- Car: 01 Canary Yellow zzzZX3
someone somewhere has to know something.
-
- Posts: 558
- Joined: Tue Apr 21, 2009 2:59 pm
- Car: 2012 Infiniti G37x
- Location: Hugo, MN.
- Contact: