Looking to pick up a set of wheels for my CD Silver SVT to put summer tires on. Will be leaving my winter tires on my stock 6 spokes. Here are a few of the contenders....
http://cgi.ebay.com/ebaymotors/17-ADVAN ... 3cb4288aeb
http://cgi.ebay.com/ebaymotors/New-17x7 ... ccessories
http://cgi.ebay.com/ebaymotors/New-17x7 ... ccessories
http://cgi.ebay.com/ebaymotors/17x7-Enk ... ccessories
http://focus.c-f-m.com/fordracingblackr ... focus.aspx
Any thoughts are appreciated in advance!
Input needed....
- ThatOneBigKid
- Posts: 105
- Joined: Thu Jul 22, 2010 2:29 pm
- Car: 2002 Acura RSX Type-SC
- Location: North Metro
2002 RSX Type-S - JRSC - Pulley Boys 3.2" Pulley (9 psi) - RC 750cc Injectors - Hondata Kpro ECU - GReddy Evo TT Exhaust - DC Sports Race Header - Injen CAI - Competition Clutch Stage 4 - Quaife LSD - 280whp
-
- Cajun Mafia
- Posts: 2515
- Joined: Sun Aug 17, 2003 7:56 pm
- Car: 01 Street Wagon/02 ZTW
- Location: Minnesota River Valley
- Contact:
Don't forget about these viewtopic.php?f=5&t=6479 .
...always in focus...
...costra nostra tobasco
...costra nostra tobasco
- ThatOneBigKid
- Posts: 105
- Joined: Thu Jul 22, 2010 2:29 pm
- Car: 2002 Acura RSX Type-SC
- Location: North Metro
If i were to get the Ford Racing wheels I would be giving steve a call. As far as I know the Advanti wheels are not dual drilled. Drilled just for the 4x108 pattern.
Sorry Hotrod but thats just a bit to rich for my blood. They would look sweet powder coated black tho....
Thanks for the input guys.
Sorry Hotrod but thats just a bit to rich for my blood. They would look sweet powder coated black tho....
Thanks for the input guys.
2002 RSX Type-S - JRSC - Pulley Boys 3.2" Pulley (9 psi) - RC 750cc Injectors - Hondata Kpro ECU - GReddy Evo TT Exhaust - DC Sports Race Header - Injen CAI - Competition Clutch Stage 4 - Quaife LSD - 280whp
- Stilz
- Ask me about Enzyte
- Posts: 1560
- Joined: Mon Aug 04, 2008 8:22 am
- Car: 02 SVTF
- Location: Lake Elmo, MN
- Contact:
I cant do chrome either, but I've seen a pearl white c30 with bronze wheels with the chrome lip and it is just beautiful...bflesher wrote:I like the second ones but what stilz says is true although it may be to much chrome for my tastes
- ThatOneBigKid
- Posts: 105
- Joined: Thu Jul 22, 2010 2:29 pm
- Car: 2002 Acura RSX Type-SC
- Location: North Metro
The Advanti V3s are on order (Choice #1), but in a Matte Gunmetal color not the Gloss Black. Hopefully they come in before the Stillwater meet.
My only question is, with the +40 offset will I need spacers at all?
Thanks again for everyone's input.
My only question is, with the +40 offset will I need spacers at all?
Thanks again for everyone's input.
2002 RSX Type-S - JRSC - Pulley Boys 3.2" Pulley (9 psi) - RC 750cc Injectors - Hondata Kpro ECU - GReddy Evo TT Exhaust - DC Sports Race Header - Injen CAI - Competition Clutch Stage 4 - Quaife LSD - 280whp
the +40 is going to bring it close to the fender (I may have this backwards, I get confused easily). Meaning you may have to run a skinnier tire to avoid rubbing the fenders, like a 205 instead of a 215.
- ThatOneBigKid
- Posts: 105
- Joined: Thu Jul 22, 2010 2:29 pm
- Car: 2002 Acura RSX Type-SC
- Location: North Metro
I was looking at a diagram and I think you may have it backwards. If I was looking at it right the bigger the + number the closer to the fender. But again I'm not sure
Anyone else know for sure how to read offsets?
Anyone else know for sure how to read offsets?
2002 RSX Type-S - JRSC - Pulley Boys 3.2" Pulley (9 psi) - RC 750cc Injectors - Hondata Kpro ECU - GReddy Evo TT Exhaust - DC Sports Race Header - Injen CAI - Competition Clutch Stage 4 - Quaife LSD - 280whp