Yup, I blew it up

KRYPTO · Thu Nov 06, 2008 10:14 am

CleanZX3 wrote:You have a black front bumper on a red car.

what the fuck does that have to do with anything?!

CrazySVTChick · Thu Nov 06, 2008 10:46 pm

If I do show up on Sat. it will be closer to noon , and I will bring my Camera cuz everyone wants pics.

focinite · Fri Nov 07, 2008 12:03 am

KRYPTO wrote:his turbo only puts out 19psi

ei but thats on cast intrnals. and an email tune. my guess is the gate didnt open but the fuel trim went lean and blam-o!!!

ch435 · Sun Nov 09, 2008 7:59 pm

Well there is a plum size hole in the block. Piston and rod torn to shreds. Crazy really. So, I'm looking for a block now.

New 2.0, new 2.3, built stroker 2.4, used 2.0 and build it up? Choices and decisions to make.
A couple I have ruled out - No V8, no rwd stuff, lol.

And thanks to those of you who came out and helped get the engine out. Couldn't have done it out with you!

Sun Nov 09, 2008 8:28 pm

ch435 wrote:Well there is a plum size hole in the block. Piston and rod torn to shreds. Crazy really. So, I'm looking for a block now.

New 2.0, new 2.3, built stroker 2.4, used 2.0 and build it up? Choices and decisions to make.
A couple I have ruled out - No V8, no rwd stuff, lol.

And thanks to those of you who came out and helped get the engine out. Couldn't have done it out with you!

I can check on engine prices for you if you like, you could also call Al and see what he's got sitting around.

Of course you could just go the built route in which case I can't help much at all for parts as Ford doesn't sell a block or crank for the Duratecs.

Sun Nov 09, 2008 11:10 pm

Call Al for a long block.

He has a bunch with less than 5k on them. Plus I'm sure he'd let a 2.0 go for fairly cheap.

ch435 · Mon Nov 10, 2008 9:57 am

Steve, why not check on engine prices if you can. That will give me a starting point and may help me decide what I want. (new vs used)

KRYPTO · Mon Nov 10, 2008 11:07 am

I'll post pics on tuesday after we get the head off and see all the carnage

Monkey Gein · Mon Nov 10, 2008 6:41 pm

CleanZX3 wrote:
KRYPTO wrote:his turbo only puts out 19psi
You have a black front bumper on a red car.

huh????? keep us up, and must see fuckedupness.... maybe you should go 3.0....

Mon Nov 10, 2008 7:19 pm

there's ups and downs in owning a focus. Not sure how I missed this post before, but I can relate. Your car is pretty unique as it sits, you need to keep it rolling.

Pepsi50195 · Tue Nov 11, 2008 8:33 am

i kid i kid

grocerygetter · Tue Nov 11, 2008 6:46 pm

Bummer Chris,

Sorry to hear about the car but I'd go ahead and build it if I had the money. I think I'd opt for a 2.3 if you could get one. If the block was still good I would rebuild it but thats not a possibility.

Brian

CleanZX3 · Wed Nov 12, 2008 2:37 am

If it were me, I would just put a stock 2.3 in. Because if you build the block, and want to get the most out of it.. your going to spend alot of $$$. Clutch, Diff, bigger turbo ect...

ch435 · Wed Nov 12, 2008 8:07 am

It's looking a lot like I'm going the built 2.3 route. For a little over 3K I get a built 2.3, 2.3 head and intake, few other misc items, and I am really rocking after that. I can then turn up the boost and get myself in the 300fwhp club.